SANYO DENKI QS1A05AN0KE08A伺服驱动器
1.产 品 资 料 介 绍：
- 核心定位：SANYO DENKI QS1A05AN0KE08A 是小功率伺服驱动器，主打轻量化与精准控制，为同功率段伺服电机提供稳定驱动信号，适配紧凑型自动化场景。
- 功率适配：从型号 “05” 推测，适配额定功率约 0.5kW 的伺服电机，适合驱动轻载部件，如小型传动模组、精密仪器执行机构、微型机械臂关节等。
- 控制模式：支持位置模式与速度模式两种基础控制方式，可通过参数灵活切换，满足小型设备的定位传动（如精密对位）与恒速运行（如匀速输送）需求。
- 供电规格：预计兼容 AC 100-240V 宽电压输入，无需改造常规工业供电回路，适配不同区域车间用电环境，降低布线复杂度。
- 信号交互：支持脉冲指令输入（如脉冲 + 方向、CW/CCW），能接收 PLC 或运动控制器的控制信号，同时反馈电机运行状态（如转速、位置），实现基础闭环控制。
- 保护功能：具备过流、过压、欠压、过热及电机过载保护，异常时自动切断输出，避免驱动器与电机因故障损坏，提升设备使用安全性。
- 适配电机：建议搭配 SANYO DENKI 同功率段小伺服电机（如 Q 系列、P 系列小功率型号），参数预设匹配，无需复杂调试即可稳定运行，减少兼容问题。
- 结构特点：采用小型化设计，体积紧凑，可嵌入设备控制柜狭小空间，或与电机就近安装，缩短接线距离，降低信号干扰风险。
- 典型应用：用于电子设备组装机（如芯片贴装机）、小型输送线（如电子元件传输）、精密检测仪器（如镜头驱动）、医疗设备辅助驱动（如样本传输）等轻载精密场景。
- 使用价值：相比通用驱动器，体积更小、能耗更低，且与同品牌电机适配性优，能简化小型自动化系统集成流程，降低设备整体成本，同时保障控制精度。
SANYO DENKI QS1A05AN0KE08A伺服驱动器 英文资料：
Core positioning: SANYO DENKI QS1A05AN0KE08A is a low-power servo drive that focuses on lightweight and precise control, providing stable driving signals for servo motors in the same frequency range and adapting to compact automation scenarios.
e777乐彩线路检测Power adaptation: Based on the model "05", it is inferred that it is suitable for servo motors with a rated power of about 0.5kW, which are suitable for driving lightweight components such as small transmission modules, precision instrument actuators, and micro robotic arm joints.
e777乐彩线路检测Control mode: Supports two basic control modes: position mode and speed mode, which can be flexibly switched through parameters to meet the positioning transmission (such as precision alignment) and constant speed operation (such as uniform conveying) requirements of small equipment.
Power supply specifications: It is expected to be compatible with AC 100-240V wide voltage input, without the need to modify conventional industrial power supply circuits, suitable for different workshop electrical environments in different regions, and reduce wiring complexity.
e777乐彩线路检测Signal interaction: Supports pulse command input (such as pulse+direction, CW/CCW), can receive control signals from PLC or motion controller, and provide feedback on motor operation status (such as speed and position) to achieve basic closed-loop control.
Protection function: It has overcurrent, overvoltage, undervoltage, overheating, and motor overload protection. It automatically cuts off the output in case of abnormalities, avoiding damage to the driver and motor due to faults and improving the safety of equipment use.
Motor adaptation: It is recommended to pair with SANYO DENKI low power servo motors (such as Q series and P series low power models) with pre-set parameters that match, allowing for stable operation without complex debugging and reducing compatibility issues.
Structural features: Adopting a miniaturized design, compact size, it can be embedded in narrow spaces of equipment control cabinets or installed near the motor, shortening the wiring distance and reducing the risk of signal interference.
Typical applications: Used in light load precision scenarios such as electronic device assembly machines (such as chip mounting machines), small conveyor lines (such as electronic component transmission), precision testing instruments (such as lens drivers), medical equipment auxiliary drivers (such as sample transmission), etc.
Usage value: Compared to general drives, it has a smaller size, lower energy consumption, and better compatibility with motors of the same brand. It can simplify the integration process of small automation systems, reduce overall equipment costs, and ensure control accuracy.
SANYO DENKI QS1A05AN0KE08A伺服驱动器 e777乐彩线路检测
产品视频
3.其他产品
HONEYWELL HCIX15-TE-FA-NC 触摸屏自动化模块
MOLAND 203091-511B 集散控制系统
REXROTH VM310 电源模块
4.其他英文产品
| AMAT 0100-76091 | AMAT 0190-41111 | AMAT 0190-14948 |
| AMAT 0100-02146 | AMAT 0190-41182 | AMAT 0190-14950 |
| AMAT 0130-76303 | AMAT 0190-41243 | AMAT 0190-14951 |
| AMAT 0100-A1603 | AMAT 0190-41364 | AMAT 0190-14953 |
| AMAT 0100-01697 | AMAT 0190-41425 | AMAT 0190-15059 |
| AMAT 0100-01485 | AMAT 0190-41508 | AMAT 0190-15066 |
The content is from Ruichang Mingsheng Automation Equipment Co., LTD
Contact: +86 15270269218
